Mitsubishi Electronics GOT1000 6.2 Panel Cutting Dimension, 6.3 Mounting Position

6.2 Panel Cutting Dimension

Make holes in the panel according to the dimensions list below.

Also, ensure 10mm of space in upper and lower parts of the panel for mounting fixtures.

• Horizontal format (If the vertical format is selected, the dimension must be rotated 90 degrees.)

153 +2-0(6.03" +0.08-0")

	10 (0.4")
	or more
)
+0.08" -0
(4.77"	Within 2 (0.08”) to 4 (0.16”)
+2 -0
121
	10 (0.4")
	or more Unit: mm (inch)

6.3 Mounting Position

When mounting the GOT, the following clearances must be maintained from other structures and devices.

•The below diagram represents a horizontal installation. (The same clearances must be maintained when rotating the GOT 90 degrees clockwise for a vertical installation.)

	Installation Environment	A, D	B	C	E
In the presence of radiated-noise or heat-generating equipment nearby		50mm or more	80mm or more*1	50mm or more*2	100mm or more
In the absence of radiated-noise or heat-generating equipment nearby		20mm or more	20mm or more	20mm or more	20mm or more
*1	Vertical Format....50 mm (1.97") or more
*2	Vertical Format....80 mm (3.14") or more

	B
C	D	E

A

Panel thickness: 2 to 4mm (0.08 to 0.16inch)

6 - 2	6. INSTALLATION
	6.2 Panel Cutting Dimension