8.4 Protective Sheet
The protective sheet is used to protect the operation surface from damage or dirt when the touch key of GOT display section is operated.
For the GOT, the protective sheet is attached for transportation. (It is different from the one described in this chapter.)
8.4.1 | Applicable protective sheet | |||||
|
|
|
|
|
| |
|
| Product name | Model name | Description |
| |
|
|
|
| Clear 5 sheets |
| |
|
|
|
|
|
|
|
| Protective sheet | 5.7" protective sheet | Antiglare 5 sheets | |||
|
|
|
| |||
| Clear (Frame: white) 5 sheets | |||||
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| Antiglare (Frame: white) 5 sheets | ||
|
|
|
|
|
|
|
8.4.2 | Installing procedure |
|
|
| ||
1.
2.
3.
4.
If the protective sheet has been already attached to the GOT, remove the old one from the GOT display section holding the lower right corner.
If the protective sheet for transportation is attached to the GOT, remove it too.
Remove the release paper from the back of a new protective sheet. Do not remove the protective film.
Make sure to fit the sheet on the GOT without wrinkles or air between the sheet and the GOT.
Remove the protective film from the protective sheet. When the user continues using the GOT with the protective film, the film may not be removed.
POINT
Replacement time of protective sheet
Check the status of the protective sheet visually by the daily inspection.
The visibility becomes worse when there is too much dirt and cracks, causing malfunction. Proceed replacement promptly.
8 - 6 | 8. OPTION |
| 8.4 Protective Sheet |