14.2.4Touch panel check
Touch panel check function
Touch panel check function checks whether there are no dead zone area in 2 dots 
2 dots.
Display operation of Touch panel check
Main menu | Debug & self check | Self check |
Touch
Touch
[Self check]
Touch
[Touch panel check]
[Debug & self check]
Touch panel check
Touch [OK]
POINT
Notes on Touch panel check
If the touched part is not filled with yellow color, there are the following two possible causes.
1.Display part failure
2.Touch panel failure
In that case, contact your local Mitsubishi (Electric System) Service.
14 - 12 | 14. GOT SELF CHECK (DEBUG AND SELF CHECK) |
| 14.2 Self Check |