Mitsubishi Electronics GOT1000 9.UTILITY FUNCTION, 9.1 Utility Execution

9.UTILITY FUNCTION

Utility is a function, which carries out connection of GOT and PLC, screen display and operation method settings, program/data control and self-check etc.

For the utility function list, refer to the following.

9.2 Utility Function List

9.1 Utility Execution

For utility execution, utility has to be displayed by installing BootOS and Standard monitor OS in the C drive (Flash memory).

There are following three types for the installing Standard monitor OS methods.

1) GT Designer3 GOT

	9
	UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING	(COMMUNICATION SETTING)
11
AND SETTINGS	UP)

GT Designer3

USB interface or

Ethernet interface or

RS-232 interface *1

Installed directly from GT Designer3

BootOS or Standard monitor OS installation

DISPLAY OPERATION	(GOT SET
12
DISPLAY	DISPLAY)

	SD card
2) GT Designer3	or
	USB memory
	OS file
	write

GT Designer3

SD card

GOT

SD card or USB memory *1

BootOS or Standard monitor OS installation

When GOT is remote, installed easily using the SD card or USB memory

Install the SD card or USB memory in GOT

CLOCK SETTINGS AND	BATTERY STATUS	(TIME SETTING AND
13
AND	(PROGRAM/DATA

3)GOT or GOT USB memory

OS file	BootOS or Standard
upload	monitor OS installation
	Install OS from GOT to GOT using
	SD card or USB memory
SD card or	Install the SD

USB memory*1 card or USB memory in GOT

*1 When installing the BootOS and standard monitor OS, standard monitor OS has to be installed in GOT in advance.

For the installation which uses GT Designer3, refer to the following.

GT Designer3 Version1 Screen Design Manual (Fundamentals) For the installation which uses GOT, refer to the following.

16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS

	FILE DISPLAY COPY		CONTROL)
		14
GOT SELF CHECK		(DEBUG AND SELF	CHECK)
		15
		CLEANING DISPLAY	SECTION (CLEAN)
		16
INSTALLATION OF		COREOS, BOOTOS	AND STANDARD

9. UTILITY FUNCTION	9 - 1
9.1 Utility Execution