FVS338 ProSafe VPN Firewall 50 Reference Manual
Router and Network Management 6-17
v1.0, March 2008
3. If supported in your region, check the Automatically Adjust for Daylight Savings Time
radio box.
4. Select a NTP Server option by checking one of the following radio boxes:
Use Default NTP Servers: If this is enabled, then the RTC (Real-Time Clock) is updated
regularly by contacting a Default Netgear NTP Server on the Internet.
Use Custom NTP Ser vers: If you prefer to use a particular NTP server, enable this
instead and enter the name or IP address of an NTP Server in the Server 1 Name/IP
Address field.
If required, you can also enter the address of another NTP server in the Server 2 Name/IP
Address field. If you select this option and leave either the Server 1 or Server 2 fields
empty, they will be set to the Default Netgear NTP servers.
5. Click Apply to save your settings or click Cancel to revert to your previous settings.

Monitoring the Router

You can be alerted to important events such as WAN port rollover , WAN traf fic limits reached, and
login failures and attacks. You can also view status information about the firewall, WAN ports,
LAN ports, and VPN tunnels.
Figure 6-5