Appendix B
System Logs and Error Messages
This appendix uses the following log parameter terms.
Table B-1. Log Parameter Terms
Term | Description |
|
|
[FVS338] | System identifier |
|
|
[kernel] | Message from the kernel. |
|
|
CODE | Protocol code (e.g., protocol is ICMP, type 8) and CODE=0 means successful reply. |
|
|
DEST | Destination IP Address of the machine to which the packet is destined. |
|
|
DPT | Destination port. |
|
|
IN | Incoming interface for packet. |
|
|
OUT | Outgoing interface for packet. |
|
|
PROTO | Protocol used. |
|
|
SELF | Packet coming from the system only. |
|
|
SPT | Source port |
|
|
SRC | Source IP Address of machine from where the packet is coming. |
|
|
TYPE | Protocol type |
|
|
System Log Messages
This section describes log messages that belong to one of the following categories:
•Logs generated by traffic that is meant for the device.
•Logs generated by traffic that is routed or forwarded through the device.
•Logs generated by system daemons NTP, WAN daemon and others.
System Startup
This section describes log messages generated during system startup.
System Logs and Error Messages |
