NETGEAR FVS338 manual Traffic Metering Logs, Unicast Logs, Icmp Redirect Logs

FVS338 ProSafe VPN Firewall 50 Reference Manual

Traffic Metering Logs

Table B-13. System Logs: Traffic Metering

Message	Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10
	MB has reached for WAN1._
Explanation	Traffic limit to WAN1 that was set as 10Mb has been reached.
	This stops all the incoming and outgoing traffic if configured like that in “When
	Limit is reached” on Traffic Meter web page.
Recommended Action	To start the traffic, restart the Traffic Limit Counter.
Unicast Logs
Table B-14. System Logs: Unicast
Message		Nov 24 11:52:55 [FVS338] [kernel] UCAST IN=SELF OUT=WAN SRC=192.168.10.1
		DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
Explanation		• This packet (Unicast) is destined to the device from the WAN network.
		• For other parameters, refer to Table B-1.
Recommended Action		None
ICMP Redirect Logs
Table B-15. System Logs: Unicast, Redirect
Message	Feb 2007 22 14:36:07 [FVS338] [kernel] [LOG_PACKET] SRC=192.168.1.49
	DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
Explanation	• This packet is ICMP Redirect message sent to the router bye another router.
	• For other parameters, refer to Table B-1.
Recommended Action	To enable these logs, from CLI command prompt of the router, enter this
	command:
		monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 1
	And to disable it,
		monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 0

B-10 System Logs and Error Messages

v1.0, March 2008