FVS338 ProSafe VPN Firewall 50 Re ference Manual
6-10 Router and Network Management
v1.0, March 2008
To configure your firewall for Remote Management:
1. Select the Turn Remote Management On check box.
a. Specify what external addresses will be allowed to access the firewall’s remote
management.
b. To allow access from any IP address on the Internet, select Everyone.
c. To allow access from a range of IP addresses on the Internet, select IP address range.
Enter a beginning and ending IP address to define the allowed range.
d. To allow access from a single IP address on the Internet, select Only this PC.
Enter the IP address that will be allowed access.
Figure 6-2
Note: For enhanced security, restrict access to as few external IP addresses as
practical.
https://194.177.0.123:8080