FTP Logging, Invalid Packet Logging

Multicast/Broadcast Logs

Table B-16. System Logs: Multicast/Broadcast

Message	Jan 1 07:24:13 [FVS338] [kernel] MCAST-BCAST IN=WAN OUT=SELF
	SRC=192.168.1.73 DST=192.168.1.255 PROTO=UDP SPT=138 DPT=138

Explanation	• This packet (Broadcast) is destined to the device from the WAN network.
	• For other parameters, refer to Table B-1.

Recommended Action	None

FTP Logging
Table B-17. System Logs: FTP

Message	Feb 2007 22 14:46:56 [FVS338] [kernel] [FTP-ACTIVE] SRC=192.168.10.211
	DST=192.168.1.97 PROTO=TCP SPT=1983 DPT=21
	Feb 2007 22 14:46:56 [FVS338] [kernel] [FTP-PASSIVE] SRC=192.168.10.211
	DST=192.168.1.97 PROTO=TCP SPT=1984 DPT=21
	Feb 2007 22 19:48:17 [FVS338] [kernel] [FTP-DATA][ACCEPT]
	SRC=192.168.10.10 DST=192.168.20.10 PROTO=TCP SPT=54879
	DPT=6459

Explanation	• These packets are active and passive FTP session data transfers
	respectively.
	• For other parameters, refer to Table B-1.
Recommended Action	To enable these logs, from CLI command prompt of the router, enter this
	command:
	monitor/firewallLogs/logger/loggerConfig logFtp 1
	And to disable it,
	monitor/firewallLogs/logger/loggerConfig logFtp 0
Invalid Packet Logging
Table B-18. System Logs: Invalid Packets

Message	2007 Oct 1 00:44:17 [FVX538] [kernel] [INVALID]
	[NO_CONNTRACK_ENTRY] [DROP] SRC=192.168.20.10
	DST=192.168.20.2 PROTO=TCP SPT=23 DPT=54899
Explanation	No Connecrtion Tracking entry exists

System Logs and Error Messages

B-11

NETGEAR FVS338 manual FTP Logging, Invalid Packet Logging, Table B-17. System Logs FTP