NETGEAR FVS338 manual Router Rear Panel, Object Descriptions

FVS338 ProSafe VPN Firewall 50 Reference Manual

Table 1-1. Object Descriptions

Object	Activity	Description
Power LED	On (Green)	Power is supplied to the router.
	Off	Power is not supplied to the router.
Test LED	On (Amber)	Test mode: The system is initializing or the initialization has failed.
	Blinking (Amber)	Writing to Flash memory (during upgrading or resetting to defaults).
	Off	The system has booted successfully.
MDM LED	On (Green)	The serial port has successfully connected to an ISP and received an
		IP Address.
	Blinking (Green)	Server data is being transmitted or received by the serial port.
	Off	The serial port has no link.
Internet	Link/Act LED
LEDs	On (Green)	The WAN port has detected a link with a connected Ethernet device.
	Blinking (Green)	Data is being transmitted or received by the WAN port.
	Off	The WAN port has no link.
	100 LED
	On (Green)	The WAN port is operating at 100 Mbps.
	Off	The WAN port is operating at 10 Mbps.
Local LEDs	Link/Act LED
	On (Green)	The LAN port has detected a link with a connected Ethernet device.
	Blinking (Green)	Data is being transmitted or received by the LAN port.
	Off	The LAN port has no link.
	100 LED
	On (Green)	The LAN port is operating at 100 Mbps.
	Off	The LAN port is operating at 10 Mbps.

Router Rear Panel

The rear panel of the ProSafe VPN Firewall 50 (Figure 1-2) contains the On/Off switch and AC power connection.

Figure 1-2

1-6 Introduction

v1.0, March 2008