NETGEAR FVS338 IPSec Restart, WAN Status, Load Balancing, Table B-6. System Logs Firewall Restart

FVS338 ProSafe VPN Firewall 50 Reference Manual

Table B-6. System Logs: Firewall Restart

Message	Jan 23 16:20:44 [FVS338] [wand] [FW] Firewall Restarted
Explanation	Log generated when the firewall is restarted.
	This log is logged when firewall restarts after applying any changes in the
	configuration.
Recommended Action	None

IPSec Restart

This logging is always done.

Table B-7. System Logs: IPSec Restart

Message	Jan 23 16:20:44 [FVS338] [wand] [IPSEC] IPSEC Restarted
Explanation	Log generated when the IPSEC is restarted.
	This log is logged when IPSEC restarts after applying any changes in the
	configuration.
Recommended Action	None

WAN Status

This section describes the logs generated by the WAN component.

If there are two ISP links for Internet connectivity, the router can be configured either in Auto Rollover Mode or Load Balancing Mode.

Load Balancing

When WAN mode is configured to Load Balancing, both the WANs are active simultaneously and the traffic is balanced among them. If one of the WAN links goes down, the whole traffic is diverted to the WAN link which is active.

This section describes the logs generation when the WAN mode is set to load balancing.

B-4 System Logs and Error Messages

v1.0, March 2008