About This User’s Guide
Guide Description
This User’s Guide describes how to install and operate Raymarine’s RayTech Navigator marine navigation software. It assumes that the PC on which the software will be installed meets the requirements for running Navigator (see Chapter 2 for details), and that all peripheral equipment that you intend to operate concurrently with Navigator has been installed and is fully operational and compatible. In many cases, you will be directed to refer to the user manual(s) that came with your peripheral devices for specific installation/operation instructions.
This Guide is intended for users with varying technical and nautical backgrounds, but assumes a general level of PC and related software environment experience, as well as a moderate knowledge of nautical terminology and practices. Certain portions of Navigator and this Guide are targeted toward the experienced sailor, and these areas are clearly identified as such.
Technical Accuracy
The technical and graphical information contained within this User’s Guide, to the best of our knowledge, was correct at the time of printing. However, Raymarine’s policy of continuous product improvement and updating may change product specifications and operating nature with out prior notice. As a result, unavoidable differences between the product and this Guide may occur from time to time, liability for which cannot be accepted by Raymarine.
iii
