Displaying the Radar Screen | Raymarine Marine GPS System guide

Advanced Navigator Functions

Displaying the Radar Screen

Data from your Pathfinder PLUS Radar can be repeated in a separate

RayTech Navigator window or overlaid on a chart.

To display radar data in a separate window:

1.Make sure the radar is operational and correctly connected to the PC.

2.Power on the radar unit.

3.Click File/Open. The Open window appears.

4.Double click the Radar icon. The radar window opens with the radar function in Standby mode.

5.From the Pathfinder Panel, click the POWER button.

Radar data is repeated over hsb2 and displayed in the window.

To overlay radar data on top of a chart:

1.Open a chart for your current area.

2.Click the Radar Overlay button on the toolbar. Radar data is displayed over the chart.

3.Click the down arrow adjacent to the Radar Overlay window. The transparency slider appears.

4.Move the transparency slider up/down to decrease/increase the overlay's transparency over the chart.

Displaying the “Top Line” Status Header

You can display a "Top Line" header above the radar window that shows current status of the radar display settings.

To display the Top Screen:

1.From within the Radar Window, click the right mouse button.

2.Select View/Top Line to toggle the Top Line on.

The informational header appears at the top of the radar window displaying range, rings, course, heading, which settings are set for automatic from GAIN, SEA and TUNE, and whether Interference Rejection (IR) or Target Expansion (EXP) have been set.

3.Click the right mouse button and select View/Top Line again to toggle the Top Line off. The top line header disappears and the size of the radar window is maximized.

5-3

Image 94

Raymarine Marine GPS System Displaying the Radar Screen, Displaying the Top Line Status Header, To display the Top Screen

Contents

Distributed by Navigator Disclaimers and Warranty Guide Description Technical Accuracy Conventions Generall Conventtiions Email Address Telephone United StatesTelephone Europe Mailing AddressesPage Table of Contents Using Navigators Interface Customiiziing the Interface Working With Charts and Routes4-1 Measurriing Range and Bearriing Usiing VRM//EBL Usi ing Sonar Wi ith Navi igator Appendix a Connecting Peripheral Instruments Chapter Introduction Welcome to RayTech Navigator Easy Marine Navigation Using Routes and Waypoints Multiple Chart Formats for Flexibility Comprehensive Weather/Oceanographic Reporting Navigator’s Toolbars, Functionbars, and Databoxes Contour Display Optional Modules Sail Racer Module Fishing Pro Module Overview Before You Begin Hardware Requirements Setting Your PC Monitor’s Colors for Best DisplayMinimum System Requirements Installing From a CD Installing NavigatorTo install Navigator from a CD InstallShield Wizard Welcome Screen InstallShield Wizard Customer Information Screen InstallShield Wizard Setup Type Screen ISW Custom Setup screen choices are defined as follows InstallShield Wizard Ready to Install Screen Installing From the Internet Chapter Using Navigator’s Interface Main Interface Component Descriptions Navigator’s Main Interface File Menu Drop-Down MenusWaypoint Menu Route Menu Tools Menu Tools/Pre-Start Menu View Menu Window Menu Help Menu Standard Toolbar ToolbarsWaypoints and Routes Toolbar Charting Toolbar Alarm Toolbar Animation Toolbar Tides/Currents Toolbar View Toolbar Fishing Toolbar Pre-Start Toolbar Yacht Racing ToolbarWeather Toolbar Pathfinder Panel Toolbar Functionbar MenusStandard Functionbar 22. Standard Functionbar Menu Hierarchy Goto Button Route ButtonMarks Button Top-Level More Button Second-Level More Button File Button Weather Animation Button Setup Button Radar Functionbar 31. Radar Functionbar Menu Hierarchy Targets Button Heading Mode ButtonMarpa Button Gain Button 35. Radar Functionbar Gain Button Descriptions VRM/EBL Buttons 36. Radar Functionbar VRM/EBL Button Descriptions Sonar Functionbar Tune Button 38. Sonar Functionbar Menu Hierarchy Frequency Button Zoom Button Bottom Lock Button Scope Button 43. Sonar Functionbar VRM/EBL Button Descriptions Alarm Buttons 44. Sonar Functionbar Alarm Button Descriptions Using the Customize Dialog Box Customizing the Interface Commands Tab To customize drop-down menus To display the Toolbars tab To reset Toolbars to original default settingsToolbars Tab To create and name a custom Toolbar 46. Customize Dialog Box Toolbars Tab To associate keystrokes with commands Keyboard Tab Menu Tab 48. Customize Dialog Box Menu Tab Options Tab To display the Options tab Installing Charts About Using Charts with Navigator Where to Store Charts Installing MapTech PCX and NOAA/BSB Charts RayTech Settings Dialog Box Chart Installer Screen Chart Manager Screen 1 Showing Installed Charts Working With Routes Creating a Route To create and name a route Beginning a Route Completing a Route Waypoint Basics Adding, Moving, and Deleting Editing Routes and WaypointsTo add a waypoint to a route 11. Edit Route Dialog Box Adding a Waypoint to a Route To move relocate a waypoint 12. Moving a Waypoint 13. Moving the Waypoint You Are Approaching To The Vessel To put a new waypoint at your vessel’s current position 15. Placing a Waypoint At The Vessel’s Current Position To put a new waypoint at the cursor’s current position 17. Placing a Waypoint At The Cursor’s Current Position 18. Placing a Man Overboard Marker To delete a waypoint from a route 19. Deleting a Waypoint To modify a waypoint’s display characteristics Modifying Waypoints Working With Charts And Routes Setting Relative Waypoints To set one waypoint as relative to another To temporarily set one waypoint to specific coordinates To return a waypoint to its relative coordinates Working With Waypoint Groups To create a new waypoint group To rename a waypoint group 22. Renaming a Waypoint Group To delete a waypoint group 23. Deleting a Waypoint Group To display or hide a waypoint group 24. Showing or Hiding a Waypoint Group Using the Waypoint Recycle Bin To retrieve waypoints from the recycle bin 26. Retrieving Waypoints From The Recycle Bin Using Radar With Navigator Chapter Advanced Navigator Functions RayTech Navigator User’s Guide Displaying the Top Line Status Header To overlay radar data on top of a chartDisplaying the Radar Screen To display radar data in a separate window Displaying the Control Panel To display the Control Panel Using the Pathfinder Panel Toolbar Using the Range Control Changing the Range Standard Range Scale Radar Range Scales Determining Actual Radar Range Radar Range Interpreting and Adjusting the Radar Picture Controls to Adjust the Radar Picture Identifying False Echo Returns Side Lobes Indirect False Echoes Multiple Echoes Blind Sectors or Shadow Effect To adjust the Gain Radar Gain Control Sea Clutter Control Radar Sea Clutter Display To adjust Sea Clutter control Rain Clutter Control Radar Rain Clutter Display To adjust the Rain and FTC controls That you leave the Tune control in Auto mode Tuning the ReceiverTo tune the radar To change target mode settings Changing the Target Display Interference Rejection Target Expansion Measuring Range and Bearing Using VRM/EBL Target Wakes RayTech Navigator User’s Guide Measuring Range and Bearing to Target from Vessel Using VRM/EBLTo access VRM/EBLs Click To move a VRM or EBL Moving a VRM/EBLTo Move Click Placing Marks To place a mark symbol at the cursor positionTo place a mark symbol at the current vessel location To remove marks Safety Notices Introduction to Marpa Risk Assessment Target Data Target Vector and History Radar Range Scales Acquiring a Marpa Target To acquire a Marpa target Deleting a Marpa Target Using the Marpa Dialog BoxTo remove a target from the Marpa database To view target data the Marpa List To acquire a targetTo clear a target To view selected target data in the Marpa box Using Sonar With Navigator To display sonar data in a separate Navigator window Pathfinder Panel for Sonar Fish Indications To display the depth of the fish Bottom Indications Effect of Frequency and Boat Speed Depth Target ID To toggle on and off the Target Depth ID Changing the Scroll Speed Selecting the Background ColorTo change the background color To change the scrolling speed To pause the scrolling display Adjusting the Range Control To adjust the range and shift values To change the power setting Selecting the Power SettingSelecting the Frequency Adjusting Display Gain Sensitivity To change the frequency Adjusting Color Gain To adjust the Color Gain To display the A-Scope image Using the A-ScopeTo remove the A-Scope image Using Bottom Lock To display the Bottom Lock image To switch the white line feature on and off Using the White LineUsing Zoom To use zoom Using Alarms Using VRM To set an alarm To use the VRM Using Waypoints To Place a Waypoint Using Polars to Optimize Your Performance 13. Typical Polars Plot Screen Collecting Data Entering and Editing Data Polar Parameters Screen 14. Polar Parameters Screen Advanced Navigator Functions Data Tests Screen 15. Data Tests Screen Advanced Navigator Functions RayTech Navigator User’s Guide ForestayStrain Displays only those tests that How to Graph and Read a Polar Plot To graph a Polar plot, do the following RayTech Navigator User’s Guide 18. Polar Plot Example Screen Using the Upwind, Downwind, and Vmc Plot Screens 19. Upwind Plot Screen 20. Downwind Plot Screen 21. Vmc Plot Screen Calibrating to Ensure Data Accuracy Boat Speed Calibration Compass Calibration Apparent Wind Angle Calibration True Wind Angle Calibration 22. Twa Corrections Screen True Wind Speed Calibration 23. Tws Corrections Screen Using the Engine Instrument Panel Displaying the Panel 24. Single Engine Instrument Panel with Tachometer Configuring the Panel 25. Engine Panel Settings Screen Showing Instruments Tab 26. Engine Panel Setting Screen Showing Panel Tab Appendix a Connecting Peripheral Instruments Connecting to Instruments Via an Nmea Cable Figure A-1. Raymarine Nmea Connection Cable, Part No. E86001 Connecting Directly to a GPS Table A-1. Connecting Navigator Directly to GPS System Connecting Directly to NMEA-Equipped Instruments Connect Cable Color To Nmea Instrument Lead Connecting Directly to Radar Table A-3. Connecting Navigator Directly to Radar System Connecting Directly an Autopilot Table A-4. Connecting Navigator Directly to Autopilot System Connecting Specific Instruments and Devices Connecting to a Raymarine Direct SeaTalk Interface Connecting to a Raytheon Autohelm System Figure A-1 and Table A-5 Table A-6. Connecting Navigator to a B&G Performance Board Connecting to B&G InstrumentsTable A-7. Connecting Navigator to a B&G Nmea FFD Display Connecting to KVH Instruments Table A-8. Connecting Navigator to a KVH Race Box Connecting to Ockam Instruments Basic Nmea and RS-232 Cabling Principles Nmea Basics RS-232 Basics RayTech Navigator User’s Guide Proper Cable Shielding Circuit Grounding IssuesPreventing Interference and Crosstalk Connecting With a KiwiTech Cable Pin Serial Direct RayTech Navigator Version Raymarine Interim Sheet Click Save Now Click Send Now Create Route Charting Enhancements New Databoxes Other Vessel Tracking DataTrak Enhancements