Raymarine Marine GPS System manual Completing a Route

Working With Charts And Routes

4.Draw the route you want to take. Left-click at the places

where you want to leave a waypoint marker. To remove

waypoints, click the Undo Wp button on the toolbar.

The route name along with the range and bearing of each leg is displayed between each waypoint (Figure 4-9).

5.As shown in Figure 4-9, when you reach the end of the route,

right-click and select Finish Quick Route, or just click

the Create Route button on the toolbar.

Left-click to place waypoints

To end the route, right-click and select

Finish Quick Route, or, click the Create Route

button on the Toolbar

Figure 4-9. Completing a Route

4-9