RayTech Navigator User’s Guide
Polar Parameters Screen
To enter data into the Polar Parameters screen, do the following:
1.On the Polars screen, click the Polar tab. The Polar Parameters screen is displayed (Figure
Click on any cell to edit its value
Click Apply to plot new variables after editing
Click Open to load Polar Parameters
Click Save/Save As to save changes to file
Loaded Polar Parameters filename appears here
Figure 5-14. Polar Parameters Screen
2.Replace as much of the default data as possible with real data that you’ve collected. You can modify the default values shown, or you can load an existing Polar Parameters file. To modify the values shown, skip to Step 4. To load an existing Polar Parameters file, click Open. The open file dialog box is displayed.
3.Choose the Polar Parameters file (.rpl extension) you want, then click Open. The selected file is displayed.
