
Advanced Navigator Functions
Radar Gain Control
The Gain control adjusts the level of the display of signals received from the scanner; it is equivalent to a volume control on a radio. The Gain control can be set either to Auto or Manual modes.
In Auto mode, the Pathfinder Plus radar optimizes the setting. In harbors or close proximity to land different auto settings may be necessary to cater for the effects of land clutter.
Alternatively, set both Sea Clutter and Gain to Manual mode, and then adjust the settings to ensure that all close small targets are visible. When the Gain control is set to Manual, you should check it every time you change the range scale. On long range settings, the gain should be set to give a slight speckle in the background of the radar picture. On shorter ranges, you may wish to reduce the gain slightly to reduce the speckle and therefore improve target definition. Do not set the gain too low, or you may miss small or weak targets. The new Gain mode (auto or manual) and values are also retained each time you turn the radar off or on.
Note: Gain can only be adjusted if the control is set to Manual adjustment. Because the SEA control affects the gain, you may need to manually readjust it if you manually change the Gain setting.
To adjust the Gain:
1.Select a range appropriate to the adjustment you want to make.
2.From the Pathfinder Panel, click the GAIN button. The Gain Functionbar buttons are displayed.
or
Click the right mouse button and select View/Control Panel. The Control Panel appears.
3.Click the GAIN Functionbar button . The button toggles the control between Auto and Manual mode.