Raymarine Marine GPS System manual Using the Engine Instrument Panel

RayTech Navigator User’s Guide

Using the Engine Instrument Panel

This section explains how to display and configure the engine instrument panel (Figure 5-24). The panel is composed of up to ten gauges, including a tachometer, oil pressure gauge, volt meter, etc. You can select which gauges are displayed and what they show, and you can monitor the operation of up to two onboard engines with two concurrently displayed engine panels. The engine panel can contain some or all of the following components:

∙Tachometer – Displays engine revolutions up to 1800, 3000, 4000, or 6000 RPM.

∙Battery – Displays the voltage level of the battery for 12- or 24-volt systems.

∙Turbo – Displays the turbocharger’s boost level in pounds- per-square-inch (PSI) and barometrically (BAR) [range: 2 bar/28 psi up to 30 bar/435 psi].

∙Turbo Oil – Displays the engine turbocharger’s oil pressure

in PSI and BAR (same ranges as Turbo).

∙Engine Oil – Displays the engine’s oil pressure in PSI and BAR (same ranges as Turbo).

∙Tank Fuel – Displays the level of fuel in the fuel tank.

∙Gearbox – Displays the gearbox oil pressure in PSI and BAR (same ranges as Turbo).

∙Air Intake – Displays the temperature of the air being drawn into the engine’s air intake in Fahrenheit/Celsius degrees (range: 120 C/250 F up to 150 C/300 F).

∙Water – Displays level of water in the reservoir.

∙Total Engine Hours – Displays the total number of hours the engine has been run since new.

∙Trip Engine Hours – Displays the number of hours the engine has run on the current outing (can be reset for each trip).

5-70