2 | Raymarine Interim Sheet |
|
|
2.Click Next.
The HSB2 Waypoint Transfer dialog appears.
3.Click the Change Option button.
The Waypoint Sending Option dialog appears.
4.Select the waypoints/routes you wish to send.
5.Click OK.
By default, the Waypoint/Route Transfer feature transfers all waypoints and routes stored by RayTech. Raymarine electronics have storage limits of 1000 waypoints and 20 routes, each containing a maximum of 50 waypoints.
RayTech does not have such a limitation. If you attempt to transfer a quantity of waypoints/routes that exceeds the waypoint/route storage capacity of the Raymarine electronic device, RayTech notifies you accordingly.
6.When you are satisfied with the list of waypoints/routes to be transferred, click the Send button.
The waypoints/routes are transferred to the electronic device, preserving waypoint and route names. The button now reads Stop sending. RayTech notifies you when the transfer has been completed.
Note: The hsb2 waypoint/route transfer process overwrites the entire way- point/route list in the receiving electronic unit.
7. If the transfer does not complete or you wish to abort, click Stop sending.
➤To receive waypoints/routes via hsb2:
Note: Before transferring waypoints/routes from a Raymarine electronic de- vice, you must first configure the unit to transmit waypoints via hsb2.
