Samsung S3F80JB Btcon Basic Timer Control Register D3H Set1 Bank0, Basic Timer Counter Clear Bit

S3F80JBCONTROL REGISTERS

BTCON — Basic Timer Control Register D3H Set1 Bank0

Bit Identifier

Reset Value

Read/Write

Addressing Mode

.7 – .4

.7		.6		.5	.4	.3	.2	.1	.0
0		0		0	0	0	0	0	0
R/W		R/W		R/W	R/W	R/W	R/W	R/W	R/W
Register addressing mode only
Watchdog Timer Function Enable Bits (for System Reset)
1	0	1	0	Disable watchdog timer function
Any other value				Enable watchdog timer function

.3 and .2	Basic Timer Input Clock Selection Bits
	0	0	fOSC/4096
	0	1	fOSC/1024
	1	0	fOSC/128
	1	1	Not used for S3F80JB.
.1	Basic Timer Counter Clear Bit (1)
	0	No effect
	1	Clear the basic timer counter value
.0	Clock Frequency Divider Clear Bit for Basic Timer and Timer 0 (2)
	0	No effect
	1	Clear both block frequency dividers

NOTES:

1.When you write a “1” to BTCON.1, the basic timer counter value is cleared to ‘00H’. Immediately following the write operation, the BTCON.1 value is automatically cleared to “0”.

2.When you write a "1" to BTCON.0, the corresponding frequency divider is cleared to '00H'. Immediately following the write operation, the BTCON.0 value is automatically cleared to "0".

4-5