32
4. Software Implementation of the Gateway
4.2.9. Transferring the DeviceNet Scanner Configuration
Once you have finished the operations described above, make sure that the changes made have been
transmitted to the DeviceNet scanner. To do this, click on the “Download to Scanner…” button on each of the
“Module” and “Scanlist” tabs in the DeviceNet scanner properties window.
If necessary, please see the RsNetWorx documentation for further details on this subject.
4.2.10. Developing a DeviceNet Application
The DeviceNet master PLC used as an example is a SLC500, marketed by Allen Bradley. An example of a PLC
application, developed in RSLogix 500, is shown in chapter 9 Appendix C: Practical Example (RSLogix 500),
page 86. This example uses the PLC, the gateway and the 8 TeSys U motor starters shown in the Software
Implementation of the Gateway.