Place the box on a flat surface.
Place a sheet of newspaper on the surface before placing the box.
4
Do not point the holes down as used toner will spill out.
Remove the seals around the holes.
Grasp the edge of each seal and pull it out toward you.
5
There are 4 seals. Remove all of the seals.
Plug the holes.
Grasp the edge of each black seal and insert it into a hole in the box to plug the hole.
6
• There are 4 seals. Plug all of the holes.
• Do not discard the waste toner box. Place it in a plastic bag and keep it until your service technician comes to perform maintenance. Your service technician will collect the waste toner box.
7
Install the new waste toner box.
Insert the box from above at a slant. (The direction opposite to when you removed it.)