Sharp MX-2600N, MX-3100N manual 212

COPIER

Storing, editing, and deleting text strings

1	Touch the [Text] key in the stamp selection screen.
	See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP" (page 2-85).
										Touch the [Store/Delete] key.
		Stamp
		Text						Cancel	OK
									First Page
2
						Print Color
				Pre-Set
							Bk(Black)		All Pages
			Recall		Store/Delete
						Direct Entry

Stamp
Text				Back
	5	10
Store/Delete
					1
					3
	No.01 AAA AAA		No.02 BBB BBB
	No.03 CCC CCC		No.04 DDD DDD
	No.05		No.06
	No.07		No.08
	No.09		No.10

Store a text string, or edit/delete a stored text string.

•To store a text string, touch a key with no text stored.

A text entry screen will appear. A maximum of 50 characters can be entered. When you have finished entering the text, touch the [OK] key. The text entry screen will close.

•To edit or delete a text string, follow the instructions below.

	To edit or delete a text string...
3	• When the key with the text string is touched, the following screen appears.
	When the [Modify] key is touched, a text entry screen appears. The stored text string appears in the text entry
	screen. Edit the text. When you have finished entering the text, touch the [OK] key. The text entry screen will close.
	• When the [Delete] key is touched, the stored text is deleted.
	A text has been already stored to this
	location. Change the text?
	Cancel	Delete	Modify

•Text settings can also be configured in the Web pages. Click [Application Settings], [Copy settings] and then [Text Settings (Stamp)] in the Web page menu.

2-98

Contents