COPIER

 

Place 12" x 18" (A3W) paper in the

 

bypass tray.

4

Pull out the extension tray, adjust the guides to the width of

12" x 18" (A3W) paper, and place the paper in the bypass tray.

After loading the paper, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY" (page 2-39).

Press the [COLOR START] key or the [BLACK & WHITE START] key.

Copying will begin.

If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the

5 first original.)

To cancel scanning and copying...

Press the [STOP] key ().

• The original must be placed on the document glass.

• The copy ratio is 100% when this function is used. The ratio cannot be changed.

• The staple, paper folding, and punch function cannot be used.

To cancel 11x17 Full Bleed...

Touch the [11x17 Full Bleed] key in the screen of step 3 so that it is not highlighted.

2-110

Contents