SCANNING FROM A COMPUTER (PC Scan Mode)
BASIC SCANNING PROCEDURE
You can install the scanner driver on your computer from the
Scanning from your computer is most useful for scanning a single original such as a photo, particularly when you want to adjust scan settings as you scan. By contrast, scanning at the machine is most useful for continuous scanning of multiple originals.
*An interface standard used for scanners and other image input devices. When the scanner driver is installed on your computer, you can use any
• Scanning in PC scan mode is only possible when the scanner driver has been installed from the "Software
•This function cannot be used when it has been disabled using "Disable Scan Function" in the system settings (administrator).
•The procedures for selecting the scanner driver and starting scanning vary depending on the
•When a large image is scanned at high resolution, the amount of data will be very large and scanning will take a long time. Be sure to select appropriate scan settings for the original (text, photo, etc.).
As an example, the procedure for scanning from the "Sharpdesk" application that accompanies the machine is explained below.
[At the machine]
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
Scan | Internet Fax | Fax | USB Mem. Scan | PC Scan |
| This machine is in the PC scan mode. |
| ||
| Do not remove the original. |
|
| |
2 | Scanner IP address:250.160.102.106 |
| ||
|
| Exit |
| |
Touch the [PC Scan] tab to switch to PC Scan mode.
If the [PC Scan] tab does not appear, touch the 
tab to move the screen.
When PC scan mode is selected, only the [Exit] key displayed in the touch panel can be used on the machine; no other keys can be used.