Sharp MX-2600N, MX-3100N manual 133

COPIER

(1)		(2)	Select the 2-sided copy mode.
			(1)	Touch the [1-Sided to 2-Sided] key.
	2-Sided Copy	OK
			(2)	Touch the [OK] key.

3

Binding

Change

The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.

	Color Mode				Special Modes
	Full Color
					2-Sided Copy
				Plain
				8½x11	Output
	Exposure	1. 8½x11
	Auto	2. 8½x11R			File
		3.	8½x14
		4.	11x17
4					Quick File
	Copy Ratio	Original		Paper Select
	100%	Auto		Auto
		8½x11		8½x11
				Plain

Check the paper to be used and the color mode.

Make sure that the desired paper (tray) and color mode are selected.

•To change the paper (tray), touch the [Paper Select] key. ☞PAPER TRAYS (page 2-11)

•To change the color mode, touch the [Color Mode] key. ☞COPY COLOR MODES (page 2-21)

Depending on the size of the placed original, there may be cases where the same size of paper as the original is not selected automatically. In this event, change the paper size manually.

					Set the number of copies (number of
				7
					sets) with the numeric keys.
			Special Modes
			2-Sided Copy
5		Plain
	• Up to 999 copies (sets) can be set.
	• A single copy can be made even if "0" appears for the number of copies.
	If an incorrect number of copies is set...
	Press the [CLEAR] key ( ) and then enter the correct number.
6	Press the [COLOR START] key or the [BLACK & WHITE START] key.
	Scanning begins.
	Remove the original and place the next original, and then press the [COLOR
7 START] key or the [BLACK & WHITE START] key.

Repeat this step until all originals have been scanned.

For the second original and following originals, use the same [START] key as you did for the first original.

2-19

Contents