TRANSMITTING AN IMAGE
SENDING AN IMAGE IN SCAN MODE
This section explains the basic procedure for transmission in scan mode (Scan to
When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added. If you wish to change the mode or destination, touch the [Cancel] key in the touch panel and then follow the procedure below.
Original size detector
Place the original.
Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size.
• When placing the originals, orient them as shown below.
| Originals | Document feeder tray |
| Place the original face up. | |
|
| |
| Portrait orientation* |
|
1 | 1 | 1 |
| Landscape orientation |
|
| 1 | 1 |
Document glass
Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale.
1
1
*To place a large
•Place
•Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission.