OPERATION PANEL

(1)

(2) (3)

(4)

(5)

(6)

JOB STATUS

PRINT

 

READY

 

DATA

SYSTEM

SETTINGS IMAGE SEND

LINE

DATA

HOME

LOGOUT

(7) (8)

(1)Touch panel

Messages and keys appear in the touch panel display. Touch the displayed keys to perform a variety of operations.

When a key is touched, a beep sounds and the selected item is highlighted. This provides confirmation as you perform an operation.

☞TOUCH PANEL (page 1-10)

(2)[SYSTEM SETTINGS] key

Press this key to display the system settings menu screen. The system settings are used to configure paper tray settings, store addresses for transmission operations, and adjust parameters to make the machine easier to use.

(3)[JOB STATUS] key

Press this key to display the job status screen. The job status screen is used to check information on jobs and to cancel jobs.

For details, see the chapters for each of the functions in this manual.

(4)PRINT mode indicators

•READY indicator

Print jobs can be received when this indicator is lit.

•DATA indicator

(5)Numeric keys

These are used to enter the number of copies, fax numbers, and other numerical values. These keys are also used to enter numeric value settings (except for the system settings).

(6)[CLEAR] key ()

Press this key to return the number of copies to "0".

(7)[HOME] key

Touch this key to display the home screen. Frequently used settings can be registered in the home screen to enable quick and easy operation of the machine.

☞HOME SCREEN (page 1-22)

(8)IMAGE SEND mode indicators

•LINE indicator

This lights up during transmission or reception of a fax or Internet fax. This also lights during transmission of an image in scan mode.

•DATA indicator

This blinks when a received fax or Internet fax cannot be printed because of a problem such as out of paper. This lights up when there is a transmission job that has not been sent.

This blinks while print data is being received and lights steadily while printing is taking place.

1-8