REMOTE OPERATION OF THE MACHINE
The remote operation function allows you to operate the machine from your computer.
When this function is added, the same screen as the operation panel screen appears on your computer.* This allows you to operate the machine from your computer in the same way as if you were standing in front of the machine.
*Before using this function, set "Remote Operation Settings" in the system settings (administrator) to allow operation. To use the remote operation function, the machine must be connected to a network and a VNC application must be installed on your computer (recommended VNC software: RealVNC Version 4.3).
Your computer
Operate the
machine using your computer
screen.
Network
Operation panel
The machine
How to use the remote operation function
The procedure for using this function is as follows:
Example: RealVNC
(1)Start the VNC viewer
(2)Enter the IP address of the machine in the "Server" entry box.
(3)Click the [OK] button.
When the machine is connected to the remote software, you wish to disconnect, exit the remote software or touch
appears on the system bar of the machine's touch panel. If 
.
Use the operation panel in the same way as you would on the machine. For detailed procedures, see the chapters for each of the functions in this manual.
System Settings (Administrator): Remote Operation Settings
Set the operation authority for the remote operation function.