Sharp MX-2600N, MX-3100N manual 155

COPIER

(1)(2) Select the bypass tray.

								(1)	Touch the paper size key of the bypass tray.
	Paper Select						OK
								(2)	Touch the [OK] key.
			Paper Tray		Bypass Tray
7
						8½x11
		1.	8½x11	Plain
						Plain
		2.	8½x11R	Plain
		3.	8½x14	Plain
		4.	11x17	Plain

Press the [COLOR START] key or the [BLACK & WHITE START] key.

Scanning begins.

•If the originals were placed in the document feeder tray, the originals are copied.

•If you placed the originals on the document glass, scan each page one page at a time.

When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then

8 press the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.

To cancel scanning of the original and copying...

Press the [STOP] key ().

Enter the paper size of the bypass tray

When the [Custom Size] key is touched, the paper size entry screen appears.

								Touch the [X] key and enter the horizontal dimension of
Bypass Tray Type/Size Setting							OK	the paper with the	keys, and then touch the [Y]
Size Input							OK	key and enter the vertical dimension. When finished,
								touch the [OK] key.
	X17	Y11
			X	17	(5	1/2~17)	AB
					inch
	X17	Y11
			Y	11			Inch
					inch
					(5 1/2~11 5/8)
	X17	Y11

Stored custom paper sizes appear in the keys on the left side of the screen. Custom paper sizes are stored in the system settings. For details, see "Paper Tray Settings" (page 7-13)in "7. SYSTEM SETTINGS". If the key for the size that you wish to enter appears, touch that key.

2-41

Contents