SCANNER/INTERNET FAX

Press the [BLACK & WHITE START] key.

Scanning begins.

•If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished.

•If you are scanning the original on the document glass, scan each page one page at a time.

When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.

7

A beep will sound to indicate that scanning is finished.

The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan size, and send size. (However, when scanning each even-numbered page of the original, only the exposure can be changed.)

To cancel scanning...

Press the [STOP] key () to cancel the operation.

• Transmission is not possible at a size smaller than the original size.

• The 2in1 function cannot be used when the original is other than 8-1/2" x 11" or 5-1/2" x 8-1/2" (A4, B5, or A5) size.

• When the scan size of the original is specified by numerical values, this function cannot be used.

To cancel 2in1...

Touch the [2in1] key in the screen of step 4 so that it is not highlighted.

5-93

Contents