Press the [BLACK & WHITE START] key.
Scanning begins.
•If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished.
•If you are scanning the original on the document glass, scan each page one page at a time.
5 When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key (
) to cancel the operation.
For a broadcast transmission, changes to the transaction report print conditions apply to all destinations.
To cancel the transaction report setting...
Touch the [Cancel] key in the screen of step 4.
•System Settings (Administrator): Transaction Report Print Select Setting
This is used to set the conditions for printing transaction reports.
The factory default setting is |
| . |
|
|
| ||
|
|
|
|
|
|
| |
Single Sending: Print Out All Report/ |
| Print Out Error Report Only | /No Printed Report | ||||
|
|
|
|
| |||
Broadcasting: | Print Out All Report | /Print Out Error Report Only/No Printed Report | |||||
|
|
|
| ||||
Receiving: | Print Out All Report/Print Out Error Report Only/ | No Printed Report |
| ||||
Confidential Reception (fax mode): 
Print Out Notice Page 
/No Printed Report
•System Settings (Administrator): Original Print on Transaction Report
This is used to have part of the transmitted original printed on the transaction report.