Sharp MX-2600N, MX-3100N manual 418

FACSIMILE

			(2)				(3)
	Fax/Special Modes						OK
		Program		Erase		Dual Page
						Scan
3
							1
		Timer		2in1	Card Shot		2
		Job		Mixed Size		Slow Scan
		Build		Original		Mode
		Original		File	Quick File
		Count

Select 2in1.

(1)Touch the [Special Modes] key.

☞SPECIAL MODES (page 4-66)

(2)Touch the [2in1] key so that it is highlighted.

(3)Touch the [OK] key.

Scan

Internet Fax

Fax

USB Mem. Scan

PC Scan

Address Book

Original

Scan:

Auto

8½x11

Send:

Auto

Direct TX

Exposure

Auto

Sub Address

4

Resolution

Standard

Address Review

Special Modes

File

Quick File

Auto Reception

Fax Memory:100%

Touch the [Original] key.

					(1)				(2)
	Fax/Original								OK
			Scan Size			100%	Send Size
5			Auto 8½x11					Auto
								Image Orientation
		2-Sided		2-Sided
		Booklet		Tablet

Specify the orientation in which the original is placed.

(1)Touch the appropriate [Image Orientation] key.

If this setting is not correct, a suitable image may not be transmitted.

(2) Touch the [OK] key.

Press the [BLACK & WHITE START] key.

Scanning begins.

•If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished.

•If you are scanning the original on the document glass, scan each page one page at a time.

When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.

6 A beep will sound to indicate that scanning is finished.

The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan size, and send size. (However, when scanning each even-numbered page of the original, only the exposure can be changed.)

To cancel scanning...

Press the [STOP] key ().

4-77

Contents