COPY COLOR MODES
The color mode of the [COLOR START] key is normally set to [Full Color] so that copying takes place in full color mode when the [COLOR START] key is pressed. If color originals are mixed together with black & white originals, set the color mode to [Auto] to have the color mode change appropriately for each original.
Touch the [Color Mode] key in the base screen to open the following screen.
Color Mode |
|
|
|
| OK | |
|
|
|
|
| ||
| Full Color |
| Single Color |
| ||
|
|
|
|
|
|
|
| Auto |
| 2 Color |
| ||
|
|
|
|
|
|
|
Touch the key of the desired color mode and then touch the [OK] key.
Full Color | The original is copied in full color. |
|
|
Auto | The machine automatically detects whether each original is color or black & white and |
| switches the mode appropriately (full color for a color original or black & white for a black & |
| white original). |
|
|
Single Color | The original is copied in the selected color only. |
| All colors in the original are changed to the selected color, which can be selected from red, |
| green, blue, cyan, magenta, or yellow. |
|
|
2 Color | Only the red areas of the original are changed to the selected color; colors other than red are |
| copied in black. This lets you make copies that are more expressive than black and white |
| copies. |
| Red, green, blue, cyan, magenta, or yellow can be selected. |
|
|