BEFORE USING THE MACHINE

PLACING THE ORIGINAL ON THE DOCUMENT GLASS

This section explains how to place the original on the document glass.

Allowed original sizes

Maximum original size

Standard sizes

11" (height) x 17" (width)

A3: 297 mm (height) x 420 mm (width)

Non-standard sizes

11-5/8" (height) x 17" (width)

297 mm (height) x 432 mm (width)

When the original is a non-standard size, see the appropriate explanation below for the mode you are using.

☞2. COPIER "SPECIFYING THE ORIGINAL SIZE" (page 2-29)

☞4. FACSIMILE "IMAGE SETTINGS" (page 4-45)

☞5. SCANNER / INTERNET FAX "IMAGE SETTINGS" (page 5-50)

Open the automatic document feeder.

1

Place the original.

Place the original face down in the far left corner of the

 

document glass.

 

Document glass scale

Original size

mark

detector

 

 

5-1/2" x 8-1/2"

 

(A5)

2

B5

8-1/2" x 11" (A4)

 

Document glass scale mark

B5R

8-1/2" x 11"R (A4R)

8-1/2" x 14" (B4)

11" x 17" (A3)

The original should always be placed in the far left corner, regardless of its size.

Align the top left corner of the original with the tip of the mark.

Do not place any objects under the original size detector.

Closing the automatic document feeder with an object underneath may damage the original size detector and prevent correct detection of the original size.

If you are placing a small non-standard size original on the document glass, it is convenient to place a blank sheet of 8-1/2" x 11" or 5-1/2" x 8-1/2" (A4 or B5) paper on top of the original to facilitate detection of the original size.

1-39