INTERIOR

(16)

 

 

(17)

 

(18)

(19)

(20) (21)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(22)

(23)

(24)

(16)Toner cartridges

These contain toner for printing. When the toner runs out in a cartridge, the cartridge of the color that ran out must be replaced.

☞REPLACING THE TONER CARTRIDGES (page 1-64)

(17)Fusing unit

Heat is applied here to fuse the transferred image onto the paper.

Caution

The fusing unit is hot. Take care not to burn yourself when removing a paper misfeed.

(18)Transfer belt

During full color printing, the toner images of each of the four colors on each of the photoconductive drums are combined together on the transfer belt. During black and white printing, only the black toner image is transferred onto the transfer belt.

Do not touch or damage the transfer belt. This may cause a defective image.

(19)Right side cover

Open this cover to remove a misfeed.

(20)Paper reversing section cover

This is used when 2-sided printing is performed. Open this cover to remove a paper misfeed.

(21)Bypass tray

Use this tray to feed paper manually.

When loading paper larger than 8-1/2" x 11"R or A4R, be sure to pull out the bypass tray extension.

☞LOADING PAPER IN THE BYPASS TRAY (page 1-34)

(25)(26) (27) (28)

(22)Main power switch

This is used to power on the machine.

When using the fax or Internet fax functions, keep this switch in the "on" position.

☞TURNING THE POWER ON AND OFF (page 1-15)

(23)Waste toner box

This collects excess toner that remains after printing.

☞REPLACING THE WASTE TONER BOX (page 1-67)

Your service technician will collect the waste toner box.

(24)Waste toner box release button

Press this button when you need to release the waste toner box lock to replace the waste toner box or clean the laser unit.

☞CLEANING THE LASER UNIT (page 1-60)

☞REPLACING THE WASTE TONER BOX (page 1-67)

(25)Handle

Pull this out and grasp it when moving the machine.

(26)Right cover of stand/1 x 500 sheet paper drawer Right cover of stand/2 x 500 sheet paper drawer (when a stand/1 x 500 sheet paper drawer or a stand/2 x 500 sheet paper drawer is installed) Open this to remove a paper misfeed in tray 3 or tray 4.

(27)Paper tray right side cover

Open this to remove a paper misfeed in tray 1 or tray 2.

(28)Right side cover release lever

To remove a paper misfeed, pull and hold this lever up to open the right side cover.

1-5