MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and other special media.
For detailed information on paper that can be loaded in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER" (page
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1 | When placing the originals on the document glass... |
|
After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner.
Place paper in the bypass tray.
Insert the paper with print side face down.
However, if the paper type is "Letter Head" or
* If "Disabling of Duplex" is enabled in the system settings (administrator), load the paper in the normal way (face up in trays 1 to 5; face down in the bypass tray).
2
When loading paper larger than
Color Mode |
|
| |
Full Color |
|
| |
|
| Plain | |
|
| 8½x11 | |
Exposure | 1. | 8½x11 | |
Auto | 2. 8½x11R | ||
3. | 8½x14 | ||
3 | |||
4. | 11x17 | ||
Copy Ratio | Original | Paper Select | |
100% | Auto | Auto | |
| 8½x11 | 8½x11 | |
| Plain | ||
|
|
Touch the [Paper Select] key.
Special Modes
Output
File
Quick File