BEFORE USING THE MACHINE
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) | (2) (3) | (4) | (5) | (6) |
(1)Automatic document feeder
This automatically feeds and scans multiple originals. Both sides of
☞PLACING THE ORIGINAL (page
(2)Front cover
Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.
☞TURNING THE POWER ON AND OFF (page
☞REPLACING THE TONER CARTRIDGES (page
(3)Paper pass unit*
This transfers output to the saddle stitch finisher.
(4)Operation panel
This is used to select functions and enter the number of copies.
☞OPERATION PANEL (page
* Peripheral device.
When a finisher / saddle stitch finisher is not installed
(7)
When a finisher is installed
(5)Exit tray unit (right tray)*
When installed, output can be delivered to this tray.
(6)Output tray (center tray) Output is delivered to this tray.
(7)Finisher*
This can be used to staple output. A punch module can also be installed to punch holes in output.