Siemens 300 Series, 600 Series manual Features that Have Been Changed or Replaced on Release

Features that Have Been Changed or

Replaced on Release 9006i

•Auto Intercom is no longer a separate feature. The same result can be achieved by setting up a repdial key for the Intercom feature access code followed by the com group member’s code.

•Automatic Camp-Onis replaced by Busy Standby Queuing.

•Call Detail Recording (CDR) Account Code is now called Account Number to reduce confusion with the term “feature access code.” If your system requires an account number, it is called a Forced Account Number. Account numbers are used to assign calls to accounts and are only checked for length by the CBX.

•Call Pickup is now called Station Pickup and no longer requires that you get a dial tone before pressing the Pickup key. To pick up a call to another extension, just press the Pickup key and then dial the extension.

•Call Forwarding is now called Forwarding. The Fixed Forwarding feature lets calls be forwarded to up to two extensions, under different conditions, and is set up at the CBX. The Variable Forwarding feature lets you temporarily forward calls to another extension or outside number that you specify from your phone. You can specify that only internal calls, only external calls, or both be forwarded to the other number under all conditions. Or, you can specify the particular conditions under which all calls will be forwarded:

—when your extension is busy

—when your extension rings, but no one answers (for a period of time configured at the CBX)

—under both of these conditions

C–4ROLMphone 300/600 User Guide