Siemens 300 Series, 600 Series manual Headset/Recorder Option, 5. Plugging a Headset into the HRO

Models: 300 Series

1 197
Download 197 pages 36.22 Kb
Page 22
Image 22
Headset/Recorder Option

Headset/Recorder Option

The ROLMphone 600 series telephones can also accept a module that lets you attach a headset and a recorder: the Headset/Recorder Option (HRO). The HRO provides for two different types of headset connectors (the PJ327 type and the RJ8), which can be plugged into the outlets on the back of the tele- phone. When a headset is plugged into the option, the speakerphone does not function.

Figure 1–5. Plugging a Headset into the HRO

The HRO also has an RJ45 connector for plugging in a tape recorder. This connector looks like a bigger version of the RJ8 headset connector. If either your headset or recorder is not working the way you think it should, make sure it is plugged into the correct HRO connector. The HRO connectors are marked with symbols for either a headset or a recorder.

Before the option is installed, the telephone must be configured for it at the CBX. For more information, see your CBX system administrator.

Note

In addition to recording the conversation of a connected call, the recorder may also record user’s comments between calls via the handset or headset.

1–8ROLMphone 300/600 User Guide

Page 22
Image 22
Siemens 300 Series, 600 Series manual Headset/Recorder Option, 5. Plugging a Headset into the HRO