Siemens 600 Series, 300 Series manual cancel your changes and the enter the sequence

To set up a	➩ Press the PROGRAM key. The PROGRAM
station speed key	status light turns on. PRESS FEATURE KEY
on a display	OR DIAL CODE is displayed.
telephone
	➩ Press the Station Speed (SPEED) key, or dial
	# # 3. SPEED DIAL is displayed.
	➩ Enter the Station Speed code you want to set up
	(0 through 9, or 00 through 29 if you are set up
	for more than 10 codes).
	Either the dialing sequence or NOTHING
	STORED is displayed. (You can view the con-
	tents of other codes by entering those codes
	now.)
	➩ Wait until NEW NUMBER? is displayed.
	➩ Enter the dialing sequence you want to assign to
	the code. If you make an error while entering
	the dialing sequence, press the CLEAR key to
	cancel your changes and the enter the sequence
	again.
	➩ If you want to set up another station speed code,
	press the STORE key. STORED is displayed.
	Before PRESS FEATURE KEY OR DIAL
	CODE is displayed, repeat the three previous
	steps.
	➩ To end setup, press the PROGRAM key. The
	PROGRAM status light turns off, and
	STORED is displayed.

3. Making Calls

Making Calls 3–35