Siemens 300 Series, 600 Series manual Community Com Group Call

Note

If you are talking on the telephone, you can press the

Buzz key without interrupting your call.

Buzz overrides Do Not Disturb mode. (See “Do Not

Disturb” on page 6–3.)

Community (Com) Group Call

Community (com) groups can be set up at the CBX so that the members of a group can call each other by dialing a short com code instead of an extension. A call from a com group is signalled by a long ring.

On CBX Release 9006.1, you can only be a member of one group at a time.

On CBX Release 9006.2 and higher, you can be a member of more than one group at a time and can be listed in a group more than once. You can also be as- signed access to groups of which you are not a mem- ber.

To call a member of your com group, you dial the com group access code followed by the com code for that member. If your telephone is a member of a com group, your CBX system administrator can tell you the com group access code.

Com groups are set up at the CBX. Groups of up to ten members have one-digit codes. Groups of more than ten members have two-digit codes. Ask your CBX system administrator for a list of the com group mem- bers to whom you have access.

To call someone in a com group to which you have access

➩Get a dial tone.

➩Dial the com group access code.

➩Dial the member’s com code.

3–18ROLMphone 300/600 User Guide