Siemens 600 Series, 300 Series manual To end setup, press the PROGRAM key. The

Models: 300 Series

1 197
Download 197 pages 36.22 Kb
Page 89
Image 89
➩ To end setup, press the PROGRAM key. The

If you want to set up another R- key, press the STORE key. If you have a display telephone, STORED is displayed. Repeat the two previous steps.

To end setup, press the PROGRAM key. The

 

PROGRAM status light turns off. If you have a

 

display telephone, STORED is displayed.

 

On your faceplate, use a pencil to label each

 

R- key you changed with the name of the

 

feature or person it dials.

To clear a

Press the PROGRAM key. The PROGRAM

repdial key on a

status light turns on. PRESS FEATURE KEY

display

OR DIAL CODE is displayed.

telephone

 

 

 

 

Press the repdial (R-) key you want to clear.

 

REPDIAL is displayed, followed by the dialing

 

sequence.

 

Before NEW NUMBER? is displayed, press the

 

CLEAR key. DELETED is then displayed.

 

To clear another R- key, press the STORE key.

 

STORED is displayed. Repeat the two previous

 

steps.

 

To end setup, press the PROGRAM key. The

 

PROGRAM status light turns off.

 

On your faceplate, erase the label next to each

 

R- key you have cleared.

 

 

 

 

 

 

Note

 

 

 

 

 

You cannot clear a repdial key on a non-display

 

telephone or any telephone without a Clear key,

 

though you can set it up to dial a different sequence.

 

 

 

 

3. Making Calls

Making Calls 3–25

Page 89
Image 89
Siemens 600 Series, 300 Series manual To end setup, press the PROGRAM key. The