Hold
Putting a Call on Hold
The Hold key lets you temporarily hang up a line without disconnecting the other party. If you do not retrieve the call after a certain period of time (deter- mined by the CBX), your telephone rings. If it is an external call and you do not answer, the call is trans- ferred to the operator.
If you want to make another call after placing a call on hold, you must use another line. If your telephone has only one line, use the consultation feature to place an- other call. (See “Consultation” on page
To put a call on | ➩ | Press the HOLD key. |
hold |
|
|
| ➩ | If you were using the handset, you can hang up. |
|
| The status light beside the line key flashes to |
|
| remind you that the call is on hold, and the CBX |
|
| will call you back after a certain period of time. |
|
| You can put only one call on hold per line. |
To reconnect to | ➩ | Press the line key next to the flashing status |
the call |
| light, or pick up the handset and press the line |
|
| key. |
To pick up a call | ➩ | Press the PICKUP key, or get a dial tone and |
on hold at |
| dial * 3. |
another |
|
|
extension | ➩ | Dial the number of the extension at which the |
| ||
|
| call was placed on hold. |
2. Using Your Phone
