Siemens 300 Series, 600 Series manual To clear a DSS key on a display telephone

To clear a DSS key on a display telephone

➩Press the PROGRAM key. The PROGRAM status light turns on, and PRESS FEATURE KEY OR DIAL CODE is displayed.

➩Press the DSS (D-) key you want to clear. DIRECT STATION SELECT is displayed, followed by the stored extension.

➩Before NEW NUMBER? is displayed, press the CLEAR key. DELETED is displayed.

➩If you want to clear another D-key, repeat the previous two steps.

➩To end setup, press the PROGRAM key. The PROGRAM status light turns off.

➩On your faceplate, erase the label next to each D- key you have cleared.

Note

You cannot clear a DSS key on a non-display telephone or any telephone without a Clear key, though you can set it up to dial a different extension.

To dial a DSS	➩ Press the DSS (D-) key for that extension. The
extension	other party will hear a triple beep.

If you press a DSS key while you are on a call, the CBX will place the first party on consultation hold before dialing the DSS extension. To reconnect to the first party, press the CONNECT key. (See “Consultation” on page 3–11.)

Note

A DSS call overrides Forwarding and both Station and Pilot Hunting. (See “Forwarding” on page 5–3 and “Hunt Groups” on page 7–7.)

3–14ROLMphone 300/600 User Guide