Siemens 300 Series, 600 Series manual 20ROLMphone 300/600 User Guide

If you are a member of a com group and want to make intercom calls to the same member often, you can set up an auto intercom repdial key. To do this, set up a repdial key with the Intercom feature access code

( * * 6) followed by the com code of another member in your group. (See “Repertory Dialing (Repdial)” on page 3–23.)

Note

A com group speaker call will override Forwarding, Do Not Disturb mode, and both Station and Pilot Hunting. (See “Forwarding” on page 5–3, “Do Not Disturb” on page 6–3, and “Hunt Groups” on page 7–7.)

You cannot transfer a com group speaker call or place it on consultation hold. In addition, you cannot dial an account number during a com group speaker call.

If the member you are calling is busy on another line, the call is converted to a regular call.

3–20ROLMphone 300/600 User Guide