Siemens 300 Series, 600 Series manual CBX Releases 9006.2 and higher require you to press

Note

	CBX Releases 9006.2 and higher require you to press
	the Transfer key (which operates like Flash in
	previous releases) as the first element to of some
	repdial feature access codes when you are setting
	them up. This is necessary with features where you
	start out with a call on your line, such as Automatic
	Privacy (to turn it off), Bad Line Reporting, Park, and
	Privacy. It alerts the CBX that a command is to be
	issued from the key pad. Earlier releases do not
	require this use of Transfer with repdials.
	If unsure of what to do, set up your repdial without
	Transfer, and if that doesn’t work, redo it with
	Transfer. For a list of feature access codes, see
	Appendix A, “Feature Access Codes.”
	If you press a repdial key while you are on a call, CBX
	Releases 9006.0 and 9006.1 will place the first party
	on consultation hold before dialing. To return to the
	first party, press the CONNECT key.
To set up a	➩ Press the PROGRAM key. The PROGRAM
repdial key	status light turns on. If you have a display tele-
	phone, PRESS FEATURE KEY OR DIAL
	CODE is displayed.
	➩ Press the repdial (R-) key you want to set up. If
	you have a display telephone, REPDIAL is dis-
	played, followed by either the dialing sequence
	or NOTHING STORED. NEW NUMBER is
	then displayed.
	➩ Enter the dialing sequence you want to assign to
	the R- key. If you make an error while entering
	the dialing sequence, press the CLEAR key to
	cancel your changes. Then enter the sequence
	again.

3–24ROLMphone 300/600 User Guide