Siemens 600 Series, 300 Series manual Feature Access Codes

Feature Access Codes

Since a set of features has already been assigned to your telephone’s feature keys, you may find that your telephone does not have feature keys for some of the features described in this guide. However, you can still use any of these features that are available on your system and permitted by your class of service by dialing that feature’s access code, if it has one.

Throughout the remainder of this guide, the steps de- scribed for using each of the system features include the feature key you press to access a feature and the feature code you can dial if you do not have that fea- ture key. If you need to know a particular feature access code in a hurry, see “Feature Access Codes” on page A–1, which lists these codes alphabetically.

Note

You must have a dial tone before entering a feature access code. If you do not have a dial tone, press the Transfer key to get one.

The feature access codes listed in this guide are the defaults that come with your system. However, your CBX system administrator can configure them differently to suit your company’s requirements.

1. Introduction

Introduction 1–17