Sun Microsystems 3.0.0 user manual Serialnumber string

	8 VBoxManage reference
	[--remote yesno] (null, VM filters only)
	[--serialnumber <string>""]
	[--maskedinterfaces <XXXXXXXX>]
VBoxManage usbfilter	remove <index,0-N>
	--target <uuid><name>global
VBoxManage sharedfolder	add <vmname><uuid>
	--name <name> --hostpath <hostpath>
	[--transient] [--readonly]
VBoxManage sharedfolder	remove <vmname><uuid>
	--name <name> [--transient]
VBoxManage vmstatistics	<vmname><uuid> [--reset]
	[--pattern <pattern>] [--descriptions]
VBoxManage metrics	list [*host<vmname> [<metric_list>]]
	(comma-separated)
VBoxManage metrics	setup
	[--period <seconds>]
	[--samples <count>]
	[--list]
	[*host<vmname> [<metric_list>]]
VBoxManage metrics	query [*host<vmname> [<metric_list>]]
VBoxManage metrics	collect
	[--period <seconds>]
	[--samples <count>]
	[--list]
	[--detach]
	[*host<vmname> [<metric_list>]]
VBoxManage dhcpserver	addmodify --netname <network_name>
	[--ip <ip_address>
	--netmask <network_mask>
	--lowerip <lower_ip>
	--upperip <upper_ip>]
	[--enable --disable]
VBoxManage dhcpserver	remove --netname <network_name>

Each time VBoxManage is invoked, only one command can be executed. However, a command might support several subcommands which then can be invoked in one sin- gle call. The following sections provide detailed reference information on the different commands.

104