Sybase 11.9.x-12.5 A Listing of All Backup Server Error Messages

A Listing of All Backup Server Error Messages

690

Many error conditions are associated with this Open Server error, differentiated

by the accompanying messages. The following errors begin with the phrase

“Open Server Fatal Error 16240.20.0”:

Net-Library routine net_address_get() failed in srv__start_net

Network error: status = 12 - Specified server name attribute could not be found

Backup Server: 1.29.2.1: Unable to start the Backup Server.

See Backup Server error log for additional information.

This is the Open Server equivalent of “Server name not found in interfaces

file.” The Backup Server will not start. Check to be sure the name of the server

you are trying to start is in the interfaces file, and remember that server names

are case-sensitive.

SYB_BACKUP is the logical name of the Backup Server. It may also be the

physical name, but it need not be.

Under normal circumstances, sybinit sets up the Backup Server, but if your

Backup Server name has been edited or deleted from the interfaces file, add it

again with sp_addserver, as follows:

1> sp_addserver SYB_BACKUP, NULL, physical-name

2> go

The specified physical-name is the name to use, both in the interfaces file and

when you do a dump or load with the at option.

A Listing of All Backup Server Error Messages

This section lists the text and gives a brief explanation for Backup Server

errors.

A Backup Server error number has four components:

major.minor.severity.state

major numbers map to functional areas as follows:

Major

Number Description