CHAPTER 4 Backup Server Error Messages
739
6.83.2 2 Volume validation error: Volume name mismatch,
volume name %1!, expected volume name %2!.
Explanation: Volumes within a stripe must have the
same name in the ANSI VOL1 label. It is possible for
a user to execute the dump command properly and still
receive this error at load time, if the first volume was
overwritten using the dumpvolume option and the
second volume, with a different name, was appended
to.
6.84.2 2 Volume validation error: illegal volume change,
device %1!: stripe %2! is already loaded.
Explanation: User remounted a tape for a stripe that
has already been loaded.
6.85.0 0 byte stream
Explanation: Internal informational message,
usually a component of another message. No user
action necessary.
6.86.2 2 Unexpected error reading from volume change
response message queue for device '%1!'.
Explanation: Failed to read from volume change
message queue.
6.87.1 1 %1!: Volume on device `%2!' contains user data. Erase
it or mount another volume.
Explanation: The mounted volume is not ready for
use. Erase it or exchange it for another.
6.88.1 1 Volume on device `%1!' has unrecognized format or
not formatted.
Explanation: The mounted volume is not ready for
use. Format it or exchange it for another.
6.89.2 2 The SYTAPE environment variable must be set.
Explanation: The SYTAPE environment variable
must be set before continuing.
Number Severity Text and Explanation